Select currency

Delivery

  • british
  • british
Shopping cart is empty
My cart (0 items)

ATK Crest 10

ATK Crest 10
349,00 €-17%
Ski Brake Width: 86 mm
ATK
Was 418,99 €
We mount bindings free of charge when you buy skis and bindings. Please check the box if you would like bindings mounted and fill in the required information for your ski boots, along with any other relevant information:

Please provide us with ALL of the following information:

  • Ski boot make and model
  • Ski boot mondopoint size
  • Ski boot sole length in mm
  • Your regular UK or European shoe size
  • If buying multiple skis/bindings, please confirm which binding you'd like attached to which ski

Crest 10 - ATK Binding

Unchanged for 2020 apart from the name, ATK's Crest had a very successful introduction last year and was our best selling "efficient " category binding. For this winter ATK have renamed the bindings the Crest 10, and have also produced the Crest 8 with a lower DIN range for lighter skiers. Designed to offer practical light weight touring ability at a very good price, the Crest 10 features many of the technnical innovations normally found on more expensive bindings.
By using simpler lines and reducing the amount of milling required, ATK have been able to produce a fully adjustable binding that weighs in at only 280 g per ski including ski brakes and with a very competitive price.

To save weight and also gain torsional rigidity the toepiece uses the MonoLink Technology 1.0 design developed initially for the SL Evo World Cup. This unusual design works well, providing reliable release from a lighter format than the traditional symmetrical design. In uphill mode the additional rigidity helps make the Crest even more resistant to knocks, you can be sure the boot will stay in the bindings during conversions. The one piece metal baseplate includes a slot for ski crampons. 
The toe piece has the same long lever that ATK developed last year that gives excellent step-in performance. This “Easy Entry System” is very positive, so knowing that you are correctly in the bindings has never been easier. When it's time to remove the bindings, the front lever design has a depression for easy pole tip placement and rapid boot step-out.

The heel unit uses individual cammed release pins giving superbly stable downhill performance and precise vertical release. Both vertical and horizontal release are adjustable with a range of 5-10 DIN. and benefit from ATK's excellent Cam Release System. This stabilizes the heel pins and provides the torsional stiffness ATK bindings are reknowned for. The special cam profile is pressed against the heel pins by a pre-tensioned spring: during step in, or in the event of a fall the pins are forced to go through the cam profile which provides a precise resistance to pin release depending upon the release value set on the bindings.  This mechanism provides the most stable downhill performance on the market with consistent reduction of boot torsion compared to any other tech heel unit design. It also provides the softest heel step in of any bindings. Lighter skiers should choose the Crest 8 which is identical apart from the lower release range of 3-8 DIN.

The heel unit offers 20 mm of boot length adjustment (+/- 10 mm) and like most modern bindings the baseplate includes a sprung mechanism, the Elastic Response System, to absorb ski flex. 
The Crest comes with ski brakes and these are available in a very generous choice of 7 widths from 75-120 mm. The plastic ends of the ski brakes are flared to offer a wider braking surface and ATK claim that these “Brake Caps” give 50% more braking power than traditional brakes.
The heel unit offers 3 positions in walk mode: flat, +37 mm and + 50 mm. (defining these in terms of height makes more sense than angle, which depends upon boot length.) 
ATK bindings with brakes have a unique design for the ski brakes. While most brands combine the ski/walk mechanism with the base of the heel unit tower. This automatically reduces the rigidity of the tower block. ATK have separated the ski brake function from the heel tower, allowing them to create torsionally stiffer bindings. Ski brakes are instead activated by a button on the side of the heel base plate. Push the button in, press the ski brake plate flat and the ski brakes are locked up. Push the button to unlock for ski mode. It works very well.

Since starting in 2006, ATK have been 100% dedicated to developing and manufacturing ski touring bindings. By focusing on their core expertise ATK have become the market leader in AT bindings, with an excellent choice of models for all touring categories.
With full release and adjustability, ski brakes and weighing only 560 g a pair, the Crest 10 is sure to be a popular model again this winter.

See our BLOG ATK 2020 Binding News for details on all ATK 2020 Bindings.
See our TABLE ATK 2020 Binding Specifications for a technical comparison of all ATK 2020 bindings.

Features: ATK Crest 10 AT Binding

EES Easy Entry System: Toepiece design gives easy and confident step in action with all tech boots, even when boot soles are worn.
Monolink Technology 1.0: Only one of the toe piece arms has springs, and this design provides a higher clamping pressure on the boot while also saving weight.
Magneto Heel Flaps: A simple yet ingenious magnet system provides stability to the heel unit and ease of use. Lightweight and comfortable to use.
Cam Release System: This mechanism inside the ATK heel units to facilitate both boot entry and binding vertical release in the event of a fall. 

 

Model: ATK Crest 10 AT Binding

Binding Type: Insert "Efficient" AT binding.
DIN Release: 5-10 DIN 
Boot length adjustment: 20 mm
Ski Brakes: 75, 86, 91, 97, 102, 108, 120 mm
Weight: 560 g / pair, 280 g per ski including ski brakes.

CORONAVIRUS